Audio Systems / FTD Audio - Conference System
EC-6000HD 5G Conference System Controller with 4CH HD MI output
Code: EC-6000HD
5G Conference System Controller with 4CH HD MI output EC-6000HD Features The main function 1.Discussion Limit the number of speakers (maximum 8 wired microphones, maximum 6 wireless microphones) and speaking time limit function Four ways of speaking First-in-first-out mode（FIFO）：When the total number of open microphones is less than N, the representative units directly open the microphones; when the total number of open microphones reaches N and not all are chairman units, the representative units open the microphones in a first-in-first-out manner among themselves. Normal mode（NORMAL）：When the number of microphones on the unit unit reaches N, when the microphone on the representative unit is turned on again, it will enter the waiting state, and the maximum number of waiting units is also N. The representative machine can exit the waiting state by pressing the microphone button again in the waiting state. When the microphone of a certain unit is turned off, the earliest microphone among all the currently waiting microphones will be automatically turned on.。 “Voice”(voice control) mode：The sensitivity is continuously adjustable, the automatic shut-off time is adjustable, and the built-in "Flash-on" technology enables faster sound activation. Application mode（APPLY）：The chairman unit with control function in the system approves or denies the representative's speaking application Gain and equalization can be adjusted independently (5 levels), and different volumes and frequency responses can be adjusted according to the voice characteristics of different speakers until the perfect effect is achieved 2. Supports both wired and wireless conferences. 3. Adopt adaptive interference avoidance technology to achieve stronger anti-interference ability, with 24 signals available. 4. Original digital ring network technology audio clock synchronous transmission technology, audio delay less than 5ms, uncompressed audio transmission with a sampling rate of 48K. 5. Built-in high-performance DSP processor with audio matrix, howling suppression, EQ, volume, delay and other adjustment functions. 6. Supports a single conference host to realize independent partition control and audio merging of 16 conference rooms. 7. The audio input interface includes 1 RCA and 2 Phoenix terminals. The audio output interface includes 1 RCA, 1 XLR, and 16 Phoenix terminals. Each output channel can adjust parameters such as EQ and volume. 8. 16-channel role separation output mode, wired or wireless units can independently output sound, and supports independent recording of each unit through recording software, and supports docking of voice transcription devices to achieve role separation. 9. The 16-channel simultaneous transmission output mode can independently output the sound of the interpreter machine to provide external equipment for use by recording or monitoring equipment. 10. 16-channel intelligent partition output mode, built-in nx16 audio matrix processor, realizes 16-channel group output function, and outputs to any channel according to any volume ratio. 11. The conference host adopts TCP/IP network protocol and supports C/S and B/S architecture at the same time, which can be controlled by PC software or browser. 12. Can control audio matrix parameters (including EQ, volume, delay, microphone sensitivity, etc.), 16-channel output mode switching, switch microphone synchronization, and control role separation host. 13. The system supports a maximum of 4096 wired conference units and 300 wireless conference units. The maximum number of speeches in the system is 8 wired microphones and 6 wireless microphones. 14. The optional ring-shaped hand-in-hand function ensures that the meeting can continue normally when one of the network cables is disconnected or there is a problem with the unit. 15. Support RS232 central control to realize microphone switch, priority, volume, shutdown and other controls. 16. The computer software can check the battery power, WiFi signal and other information status of the scanning wireless unit; it supports one-click shutdown of all wireless units and a single wireless unit. 17. Supports simultaneous interpretation function, the system can transmit up to 63+1 wired simultaneous interpretations at the same time. 18. It has a fire alarm linkage triggering interface to provide fire alarm information and remind the venue personnel to evacuate immediately to ensure the safety of the participants. 19. Supports PELCO-D and VISCA camera control protocols, and can cooperate with the high-definition camera tracking host to achieve automatic camera tracking. 20. Four microphone management modes: FIFO (first in, first out), NORMAL (normal mode), VOICE (voice control mode), APPLY (application mode). 21. The system has functions such as initiating meeting sign-in, voting, election, rating, satisfaction, customization, etc. 22. It has a 4.3-inch full-color touch screen, which can realize parameter setting or viewing and any touch operation. 23. Equipped with USB recording function. 24. Supports 10-segment EQ adjustment function. Both the 16 multi-function output channels and 2 LINEOUT output channels have 10-segment EQ adjustment function. 25. The system unit has a hot-swappable function and will automatically restore its original function when plugged in again. 26. Supports docking with the voice transcription server to realize the voice transcription function. 27. Optional dual-machine true backup function. When one host is powered off and the host fails, it can automatically switch to slave machine operation to achieve dual backup functions. 28. DANTE protocol audio output module. 29. It has 2*50W power amplifier output function and can be directly used for sound amplification. 30. It has independent headphone monitoring function. Specification Title goes here. 1. Microphone capacity: wired microphone ≤5300; wireless microphone ≤300 2. Simultaneous interpretation channels: 63+1 channels 3. Frequency response: 80~16KHz 4. Signal-to-noise ratio: >80dB(A) 5. Dynamic range: >80dB 6. Total harmonic distortion: 7. Main power supply: 100-240VAC 8. EXTENSION port: Connect to conference system expansion equipment 9. DANTE port: connects to external devices of the DANTE protocol 10. WIFI network port: connect to wireless AP 11. PC network port: connect to computer 12. Static power consumption: 30W 13. Output power consumption: 350W 14. Wired microphone connection method: special cable 15. Touch screen control: 4.3-inch full-color touch screen System environmental conditions Temperature range Transport temperature：-40°C ~ +70°C Operating temperature：0°C ~ +45°C Connection Inlustraction:
